With the GARDENA MultiControl Duo Battery Developer you can water two different areas in your garden, such as the garden behind your house and the flower bed in front. Both outputs can be programmed independently. This means that you can independently choose the start time of watering, duration and frequency. You can set up to three watering cycles for each output, lasting up to 3 hours and 59 minutes. The developer's practical screen can come out of your chair for easy programming. All selections are easy at the touch of a button. In fact, thanks to the screen information and the automatic step-by-step transition, the programming is really very easy. Also, the large screen allows easy reading of data. For each output you can connect a Hygrometer or Rain Sensor to automatically stop the program when the soil moisture is above the set level. Both outputs can be controlled by the same sensor. With the night program the watering starts automatically when the connected hygrometer detects dryness. The MultiControl Duo Battery Programmer can be connected to a 26.5 mm (G ¾) - and 33.3 mm (G1) threaded tap and operates at a pressure of 0.5 - 12 bar. Its autonomy, with a 9 V alkaline battery, is about 1 year. The battery level indicator shows when you need to replace it. The battery is not included.